Main Features of the Petzl Reverso
- Ultra light, multi-purpose belay/abseil device with direct belay brake-assist mode
- ARC technology: braking control for twin, half and single dynamic ropes
- Reverso Mode: independent and simultaneous belaying of one or two seconding climbers
- A great choice for mountain routes where direct belays are common place
- Quick changeovers from Reverso mode to belaying the leader when climbing multi-pitch route
- Can belay the leader, one or two seconding climbers and can be used for abseiling
- V-shaped friction channels: increased friction on thin ropes, friction is adapted for larger diameter ropes
- Asymmetrically grooved sidewalls: increased braking power during a leader or top rope fall or while rappelling, rope slides smoothly through device when taking up slack
- Karabiner hole to release device when loaded in Reverso mode
- Rope friendly - will not kink the ropes.
- The rounded design of the rope slots limits wear and extends the life of the device
- Single Ropes: 8.5 - 10.5mm (up to 11mm depending on the rope's suppleness)
- Half Ropes: 7.1 - 9.2mm
- Twin Ropes: 6.9 - 9.2mm
- Usage diagrams (standard belay and Reverso modes) engraved on device
- Weight: 57g
- Materials: Hot forged aluminium body
The Reverso is an ultra-light, multi-purpose belay/abseil device. The Reverso is lighter than it's previous model, the Reverso 4.
As well as having high and low friction modes due to V-shaped grooves where the rope runs and asymmetric sidewalls, the Reverso 4 can also be attached directly to the anchor/belay and used in a assisted-locking Reverso mode, with assisted braking if the seconding climber falls. The Reverso is a great choice for mountain routes where direct belays are common place, and for bringing up two seconds.
The Reverso also has a special carabiner hole at the front which enables the belayer to release the device when loaded in Reverso mode (When weighted by a second) & allows the loaded device to be easily and gradually released by gently pulling on a carabiner placed in the hole.
No posts found